We offer to our clients Galvanised metal front and rear chassis joined by diagonal arms, allowing it to concertina to 600 mm in depth.The upper part of the front face and up to 1000 mm in length at the sides is made up of a single piece of 600 mm wide flexible black PVC with interior nylon reinforcement. The top and both sides are covered with polyester interlining coated with black flexible, M2 fireproof PVC, and fixed to the structure by an extruded aluminum handrail. Available at competent rates, our folder dock shelter is applicable in loading bays.

We offer to our clients hinged industrial doors that are Constructed in L-section extruded aluminium with double thermal break, anodised to 20 microns and white enameled. Freezer doorcases are fitted with electrical resistors. Doors are finished in stainless steel, doorcases in anodised aluminium. Doorcases for panel coldrooms are supplied with white enamelled extruded aluminium pre-frames.

Door Blades:

With interior frame to match thickness and trimmed with anodised aluminium. Internal polyurethane insulation injected to a density of 40/45 kgs/m3, 90 mm and 90-120 mm thick for chiller doors, and 140 mm for freezer doors. Greater thicknesses available on request for very low temperatures.

Door furniture:

Finished in Zamak and grey epoxy aluminium. Automatic three-lever industrial catch with internal opening. Three vertical rising hinges.

Applications:
Chilling 0º C. and freezing -20 º C. Tunnel freezers.

Finishes:
AISI 304/2B, stainless steel, colorcoat, PVC or other finishes on request.

We offer Rapid Fold-up Door that are made of High-strength polyester sheet, M2 fireproof, 'bañada en PVC color', high frequency welded, opaque finish and/or with viewing panels. Reinforced with horizontal 32 mm section, 3 mm thickness SP 52 steel tube strengthening rods. Folds into flexible sections by the action of high strength polyester belts.

Frame:

Reinforced. Choice of galvanised or anti-corrosion treated and enamel finished in grey.
Electrical control panel:
IP 55 protection, printed circuit board, low voltage operation with motor feed boosted by A6 mini-meters. Heat-sensitive motor cut-out. Emergency stop button and pressure switch opening button.

Applications:

Our doors are applied at entrances to industrial premises, hypermarkets and shopping centres, for greater wind resistance in all large dimension openings.

We offer to our clients rapid roll-up door that is very durable and is available at the competent rates.
The motor is manufactured and tested to standard DIN EN 12453 (Industrial, Commercial and Garage Doors). Specifications and classifications to DIN EN 12978 (Safety Devices for Power Operated Doors and Gates). These come with following specifications:

- Power supply: 3x230 AC.
- Power rating: 35 Nm.
- R.P.M.: 160
- Opening and closing speed: 0.93 m/s.
- Electronic end-of-travel sensors.
- Safety braking mechanisms .
- Low noise gear assembly.
- No maintenance required.

Avail from us a wide range of sliding industrial If system doors that are Constructed in L-section extruded aluminum with double thermal break, anodised to 20 microns and white enamelled. Freezer doorcases are fitted with electrical resistors. Doors are finished in stainless steel, door cases in anodised aluminium. Doorcases for panel cold rooms are supplied with white enamelled extruded aluminium pre-frames.

Door Blades:

Overlap-fitted to the doorcase, with interior frame to match thickness and edged in anodised aluminium. Internal polyurethane insulation injected to a density of 40-45 kgs/m3, 90 mm thick on chiller doors and 90, 120 or 140 mm thick on freezer doors.

Fittings:

Powerful hermetic catch in stainless steel and extruded aluminium, light-touch opening from both inside and outside. Simple fitting and adjustment. Optional rail guard. Sizes as per our price list or custom-made on request.
Stainless steel fixings.



Applications:
Chilling 0º C., freezing -20º C. Tunnel freezing.

Finishes:

AISI 304/2B stainless steel, color coat, PVC or other finishes on request.